Tuesday, November 16, 2010

Fab Finds: Cricut, Cutting Vinyl and Fabric, and new Print and Cut Tutorials

Here are the instructions for cutting with vinyl.
I always forget the blade depth and pressure settings, so here they are. :)

Cutting Vinyl using Cricut & Cricut Expression Die Cutting SystemVinyl Instructions using Transfer Tape

1) Place vinyl sheet on Cricut cutting mat. Load mat into machine and confirmthat machine is set to the correct cutting mat size.2) Make cutting selection and set size as if you where cutting paper,and then press cut.Peel images off cutting mat.PREPARATION1) Place vinyl sheet on Cricut cutting mat. Load mat into machine and confirmthat machine is set to the correct cutting mat size.2) Make cutting selection and set size. For best results, set blade depth to 6 and pressure to 2.These settings will result in a "KISS CUT" or a cut that only goes throughthe vinyl leaving the backing liner uncut.3) Take ends of transfer tape in each hand with adhesive side facing down.Gently lay transfer tape over vinyl (be sure to lay it straight)image starting in the center and moving out toward the ends.4) Once tape is in place,use applicator stick to burnish*the tape on to the vinyl.Start in the center and use overlapping strokes.

APPLICATION
1)Completely clean and dry wall (or other surface) area where vinyl image is to be placed.For best results do not use a cleaner that will leave a residue.2) Lightly place image on wall using level to ensure correct placement.3) Once image is in place, use applicator stick to burnish* vinyl on to wall.For best results use overlapping strokes when burnishing*4) Gently peel back transfer tape at 45-degree angle.If vinyl starts to come off with transfer tape,lay area back down and burnish* again.

Cricut Vinyl Instructions Without Transfer Tape

PREPARATION
1) Place vinyl sheet on Cricut cutting mat. Load mat into machine and confirmthat machine is set to the correct cutting mat size.2) Make cutting selection and set size. For best results, set blade depth to 6 and preasure to 2.These settings will result in a "KISS CUT" or a cut that only goes through the vinyl leaving the backing liner uncut.

APPLICATION
1) Completely clean and dry wall (or other surface) area where vinyl image is to be placed.For best results do not use a cleaner that will leave a residue.2) Use level and pencil to draw a faint line on wall to aid in placement.3) Carefully remove the vinyl images one at a time form the backing liner and applyto the wall using the pencil line as a guide. Gently smooth down the vinyl using your fingers.4) Once all image are placed on the wall, place backing liner overthe vinyl and gently burnish* with application stick provided.5) When complete,carefully wash off or erase pencil lines.


Cutting Fabric:
I have a great video I found  that I put on my db's Crafty Corner blog along with some other links. Here's the link:   http://dbcrafty.blogspot.com/2009/05/great-tutorial-on-cutting-fabric-wthe.html

I have some other cricut info (free font links, svg files) over there too. You can find them all here:
http://dbcrafty.blogspot.com/search/label/Cricut


And, since I'm posting Cricut stuff, I just found some great info and tips on how to cut out images that you've printed on your printer, or cut shapes for your stamps! SO AWESOME! I'm so excited! :)
(No need to spend beau coup bucks on the new Cricut Imagine!)
Print and Cut


Ok, here's a video for the easiest way (I love Make The Cut!):


Here's a link that has the video instructions written out.

And here's some more links:
and here's a link with a list of other options that I haven't checked out all the way yet.

and here's another site (this link is specifically to how to use center point to cut stuff) but I bet the site has a lot of other great resources too! :) 
http://www.mypinkstamper.com/2009/01/cricut-series-7-episode-78.html

One More Note:
If you go to this link:

you can see a lot of the awesome new features of Make the Cut! 3.0, it's a beta version still, so if you buy MTC you will get the older version, but you can upgrade to this. I am seriously so excited! (and the best thing is upgrades are FREE, unlike SCAL. But that's ok. It's just one more thing that makes MTC so great.) :)

So honestly, if you own a cricut, or a gazelle, or black cat cougar, you really need to check out these videos! :) It's pretty awesome! :)

No comments:

Post a Comment

Thanks for stopping in to say hi! I always love your comments, they make me smile!

If you have a no-reply account, be sure to leave your email address so I can respond to you.